Back to previous page

Catalog

Swiss Nanofilm

Swiss (1987 - rear)

36 products

What does the nanofilm include?

  • When you order one nanofilm, you get a one-digit sticker. You can add the necessary symbols to the cart on website.

What happens if the nanofilm is scratched?

  • It is quite difficult to damage the Ecoslick® sticker because it is attached very firmly, forming an almost inseparable bond with the license plate. Even if there are scratches, it will be very difficult for the speed camera to determine which symbol is covered.

What happens to the nanofilm after washing?

  • Ecoslick nanofilm is not afraid of washing, any type of car wash. The film is almost impossible to tear off with water pressure. Therefore, be extremely careful and precise when gluing.

Is it necessary to put a film on the rear license plate of a car?

  • Depending on the terrain, speed cameras may be located in two directions and will record your car from both sides. We recommend gluing the film on both sides.

How is Ecoslick® nanofilm installed?

  • The sticker should be applied very carefully, since it will be impossible to change the position of the pasted film - it fits tightly to the surface of the number. You can see visual instructions on our set up page.

How many symbols are best covered with film?

  • The more symbols are hidden under the nanofilm, the less opportunities there are to decipher the number from the camera recording. It is recommended to cover all front and back license plates symbols.

How long will nanofilm last?

  • Ecoslick® film is designed for many years of use, since it is created from durable, wear-resistant materials designed to withstand difficult weather conditions, temperature changes and varying degrees of mechanical impact. The warranty period is 5 years.

What is the difference between an infrared flash and a camera flash?

  • Infrared light is highly focused rays that are invisible to the human eye and are different from the bright flash of a camera. It is in the infrared spectrum that automatic speed cameras operate. It is against this spectrum that Ecoslick® film acts.

What does the camera see when using nanofilm?

  • The camera only sees the illuminated area where the symbols are hidden under the Ecoslick® stickers, which blends into the white background. Accordingly, the digital system does not recognize the number and does not record it in the database of traffic violations. There is no one to give a fine!

Does nanofilm work during the day?

  • The infrared beams of speed cameras work both day and night.

Why should I buy your product?

  • Our Ecoslick® nanofilm is manufactured in Germany and is therefore reliable and effective. All numbers and symbols comply with the national standards of each country. On the market you can find offers with a suspiciously low price - accordingly, such a film will not protect you from the eyes of a traffic cop or simply will not fit the size of your license plate.

Step-by-step instructions

Swiss (1987 - rear)

In 1987, Switzerland adopted a new license plate format that became a landmark not only in terms of design but also in terms of safety. These plates, manufactured with an emphasis on high visibility and anti-counterfeiting protection, are still in use on the country's roads today. They play an important role in vehicle identification as well as road safety. But with the advancement of technology, including violation cameras and radar, car owners have faced new challenges. Today, with cameras at virtually every intersection, anti-radar solutions such as Nanofilm Ecoslick have become an integral part of modern license plate protection.

Nanofilm Ecoslick is the modern solution for camera protection

Nanofilm Ecoslick technology is a unique development created to protect license plates from being detected by cameras and radar. Unlike other solutions, this product utilizes an innovative approach by applying a special layer that changes the refraction of light. Cameras capture the license plate image based on light reflection, but with Nanofilm Ecoslick they simply can't see it. The license plate remains invisible to the cameras, yet completely legal to the human eye. This means drivers can feel confident on the road without fear of unnecessary fines.

Benefits of using Nanofilm Ecoslick:

  • Invisible to cameras - thanks to the special nanostructure, cameras are simply unable to recognize your license plate, protecting you from automatic fines.
  • Easy to install - the film is easy to apply and remove, requiring no special skills or tools.
  • Weather resistant - Nanofilm Ecoslick remains effective in all weather conditions, be it rain, snow or blazing sun.
  • Durability - this material is designed to last for years of use, providing consistent license plate fixation protection.
  • Privacy and data protection - your movement stays out of camera range, helping to protect personal data.

Types of Swiss license plates 1987

Swiss license plates have always been known for their uniqueness and reliability. The 1987 model is a classic known throughout the country and beyond.

The main types of license plates are:

  • Standard license plates - used for most private vehicles and have the familiar format with the canton code and number.
  • Commercial vehicle license plates - used for trucks and other commercial vehicles.
  • Government vehicle plates - special plates for official vehicles used by the government or municipalities.
  • Transit and temporary plates - temporary registration plates for vehicles in the process of being bought or sold or crossing the country.

Each of these types of license plates are susceptible to being captured by cameras, making them vulnerable to fines. This is where Nanofilm Ecoslick comes to the rescue.

How do I install Nanofilm Ecoslick on a 1987 Swiss license plate?

Installing Nanofilm Ecoslick is a simple task that requires no special skills. It is important to do it carefully so that the film is securely attached and performs its function effectively.

Installation steps:

  1. Cleaning the license plate - Thoroughly clean the surface of the license plate from dirt and dust using a soft cloth. This will ensure good adhesion of the film.
  2. Preparing the film - Open the package and make sure the Nanofilm Ecoslick is the right size for your license plate.
  3. Positioning - Apply the film to the license plate to make sure that it lies exactly on the surface and covers all the required areas.
  4. Application - Remove the protective layer from one edge and smoothly begin to adhere the film, smoothing it to remove any air bubbles.
  5. Fixing - Go over the entire surface of the film with a plastic card or soft cloth to ensure that the film adheres completely to the license plate.

Where to buy anti-radar stickers for Swiss 1987 license plates?

If you want to protect your license plates from cameras and avoid unwanted fines, the best solution is to buy Nanofilm Ecoslick on the official Alite website. This is where you will find the original anti-radar stickers designed specifically for 1987 Swiss license plates.

Why choose Alite:

  • Original product - guarantee of quality and effectiveness.
  • Worldwide delivery - you can order the film from anywhere in the world.
  • Guaranteed results - your protection from cameras will be reliable and invisible.

Visit the website to learn more about the product and place an order for Nanofilm Ecoslick!

Show more ↓

Buy 4 symbols and GET 10% OFF

🥳 Congratulations! You have 30% OFF

Choose products

Total: 0 items

€0,00 €0,00

Min. order 2 pcs Checkout