पिछले पृष्ठ मे वापस

सूची

Chile Nanofilm

एंटी-रडार स्टीकर्स नैनोफिल्म Ecoslick™

अल्टीमेट समाधान रडार के खिलाफ

Show more ↓

Testimonials

Recorded by

Emma Brown, United States Flag

Recorded by

Emily Johnson, United States Flag

Recorded by

John Doe, United States Flag

What does the nanofilm include?

  • When you order one nanofilm, you get a one-digit sticker. You can add the necessary symbols to the cart on website.

What happens if the nanofilm is scratched?

  • It is quite difficult to damage the Ecoslick® sticker because it is attached very firmly, forming an almost inseparable bond with the license plate. Even if there are scratches, it will be very difficult for the speed camera to determine which symbol is covered.

What happens to the nanofilm after washing?

  • Ecoslick nanofilm is not afraid of washing, any type of car wash. The film is almost impossible to tear off with water pressure. Therefore, be extremely careful and precise when gluing.

Is it necessary to put a film on the rear license plate of a car?

  • Depending on the terrain, speed cameras may be located in two directions and will record your car from both sides. We recommend gluing the film on both sides.

How is Ecoslick® nanofilm installed?

  • The sticker should be applied very carefully, since it will be impossible to change the position of the pasted film - it fits tightly to the surface of the number. You can see visual instructions on our set up page.

How many symbols are best covered with film?

  • The more symbols are hidden under the nanofilm, the less opportunities there are to decipher the number from the camera recording. It is recommended to cover all front and back license plates symbols.

How long will nanofilm last?

  • Ecoslick® film is designed for many years of use, since it is created from durable, wear-resistant materials designed to withstand difficult weather conditions, temperature changes and varying degrees of mechanical impact. The warranty period is 5 years.

What is the difference between an infrared flash and a camera flash?

  • Infrared light is highly focused rays that are invisible to the human eye and are different from the bright flash of a camera. It is in the infrared spectrum that automatic speed cameras operate. It is against this spectrum that Ecoslick® film acts.

What does the camera see when using nanofilm?

  • The camera only sees the illuminated area where the symbols are hidden under the Ecoslick® stickers, which blends into the white background. Accordingly, the digital system does not recognize the number and does not record it in the database of traffic violations. There is no one to give a fine!

Does nanofilm work during the day?

  • The infrared beams of speed cameras work both day and night.

Why should I buy your product?

  • Our Ecoslick® nanofilm is manufactured in Germany and is therefore reliable and effective. All numbers and symbols comply with the national standards of each country. On the market you can find offers with a suspiciously low price - accordingly, such a film will not protect you from the eyes of a traffic cop or simply will not fit the size of your license plate.

Step-by-step instructions

Materials Needed:

Alcohol wipes (included in kit)
Nanofilm Ecosllick stickers

Step 1: Clean the License Plate
Use the alcohol wipes provided in the kit to thoroughly clean the surface of the license plate.
Ensure the plate is free from dust, dirt, and grease.
Allow the surface to dry completely.

Step 2: Remove the Sticker from the Paper Backing
Carefully peel the antiradar sticker off its paper backing.
Avoid touching the adhesive side to prevent contamination.

Step 3: Apply the Sticker to the License Plate
Align the sticker with the license plate's desired position.
Gently press the sticker onto the plate, starting from one side and smoothing it out to avoid air bubbles.
Apply even pressure across the entire sticker to ensure a firm bond.

Step 4: Remove the Transparent Mounting Film
Slowly peel off the transparent mounting film from the top of the sticker.
Ensure the antiradar sticker remains securely attached to the license plate.

Important Tips:
Apply the sticker in a dry, dust-free environment.
Avoid washing the vehicle for 24 hours after application for optimal adhesion.

Chile Nanofilm

Keep Your Chile License Plates Protected from Prying Cameras with Chile Nanofilm

In an era of increasing road surveillance, protecting your privacy is more important than ever. Chile Nanofilm is an advanced, nearly invisible nano-protective film that seamlessly integrates with Chilean license plates, reducing visibility to traffic and speed cameras without altering their original design. Whether you are driving in busy urban areas with constant monitoring or on highways with automated speed enforcement, Chile Nanofilm provides an effective and discreet solution to safeguard your license plate.

Why Chile Nanofilm is Perfect for Your License Plate

Unlike bulky covers that can attract unwanted attention, Chile Nanofilm is specifically engineered to work with Chilean license plates, ensuring a flawless, low-profile integration. Available in two optimized variants:

  • Chile v1 (2007-present) – Designed for plates with 66mm numbers and 70mm letters, offering seamless coverage without affecting readability.
  • Chile v2 (2014-present) – Tailored for plates with 68mm numbers and 71mm letters, ensuring maximum effectiveness while maintaining the plate’s natural look.

This cutting-edge film utilizes light-reflecting and absorbing technology to make plates less detectable by surveillance cameras, helping drivers avoid unnecessary fines while staying compliant with local regulations.

Key Features of Chile Nanofilm

✔ Virtually Invisible Protection – The ultra-thin nano film discreetly reduces camera detection while keeping your plate looking original.
✔ Engineered for Chilean Plates – Precision-crafted to fit embossed license plates with perfect dimensions for both v1 and v2 models.
✔ Advanced Camera-Blocking Technology – Effectively distorts how cameras capture plate details, enhancing your privacy.
✔ Durable & Weather-Resistant – Built to withstand Chile’s diverse climate, including intense sun, rain, and temperature fluctuations.
✔ Quick & Easy Application – Simple, DIY installation in minutes with long-lasting protection.

How Chile Nanofilm Works

Unlike traditional plastic covers or tinted overlays, Chile Nanofilm works by manipulating how cameras process reflected light. Its specialized nanostructure interacts with infrared sensors and flash-based cameras, disrupting the capture of clear plate details. This means your plate remains fully visible to the human eye but is significantly harder for automated systems to detect.

Enhanced Privacy for Chilean Drivers

With growing concerns over excessive surveillance and automated enforcement, Chile Nanofilm offers a legal, discreet, and highly effective alternative to traditional plate covers. Unlike bulky shields that can crack, fade, or raise suspicion, this nanofilm is virtually undetectable, blending seamlessly with your license plate’s surface.

Secure Your Plate’s Privacy with Chile Nanofilm

Take control of your privacy today with Chile Nanofilm—the ultimate stealth solution for protecting your license plate from unwanted surveillance. Drive confidently, knowing that your plates remain safeguarded while preserving their original aesthetic.

🚗 Order now and experience the future of license plate protection!

Show more ↓

खरीदना 4 प्रतीक और पाना 10% बंद

🥳 बधाई हो! आपको 30% की छूट है

Choose products

कुल: 0 सामान

$0.00 $0.00

न्यूनतम. 2 पीस ऑर्डर करें चेक आउट
Top Icon

🤍 Happy Women’s Day 🤍

We prepared a gift for you

Get up to

-50% OFF