Zurück zur vorherigen Seite

Katalog

Nanofilm Ecoslick

Nanofilm Ecoslick Moto US

Material Nanofilm Ecoslick™

Ultimate solution against radars

Show more ↓

Suitable for

Moto

Material Size

100 mm

Color

Black

Version

Nanofilm Ecoslick Moto US,

Flat – flat numbers and letters, characters are printed and do not have any volume

Embossed – embossed numbers and letters, characters are extruded from the surface of the license plate

Suitable for

Moto

Material Size

100 mm

Color

Black

Version

Nanofilm Ecoslick Moto US,

Flat – flat numbers and letters, characters are printed and do not have any volume

Embossed – embossed numbers and letters, characters are extruded from the surface of the license plate

Testimonials

What does a nano-film include?

  • When ordering one nano-film, you receive a piece of material from which you can cut out the letters you need on your own.

What happens if the nanofilm is scratched?

  • It is quite difficult to damage the Ecoslick® because it is attached very firmly, forming an almost inseparable bond with the license plate. Even if there are scratches, it will be very difficult for the speed camera to determine which symbol is covered.

What happens to the nanofilm after washing?

  • Ecoslick nanofilm is not afraid of washing, any type of car wash. The film is almost impossible to tear off with water pressure. Therefore, be extremely careful and precise when gluing.

Is it necessary to put a film on the rear license plate of a car?

  • Depending on the terrain, speed cameras may be located in two directions and will record your car from both sides. We recommend gluing the film on both sides.

How is Ecoslick® nanofilm installed?

  • Cut the piece of the material and stick it on the corresponding symbol on the license plate. Then cut around the outline of the symbol. Cut slowly and do not press the blade too hard to avoid damaging the license plate. Gently remove the exess of material and it's done!

How many symbols are best covered with film?

  • The more symbols are hidden under the nanofilm, the less opportunities there are to decipher the number from the camera recording. It is recommended to cover all front and back license plates symbols.

How long will nanofilm last?

  • Ecoslick® film is designed for many years of use, since it is created from durable, wear-resistant materials designed to withstand difficult weather conditions, temperature changes and varying degrees of mechanical impact. The warranty period is 5 years.

What is the difference between an infrared flash and a camera flash?

  • Infrared light is highly focused rays that are invisible to the human eye and are different from the bright flash of a camera. It is in the infrared spectrum that automatic speed cameras operate. It is against this spectrum that Ecoslick® film acts.

What does the camera see when using nanofilm?

  • The camera only sees the illuminated area where the symbols are hidden under the Ecoslick® stickers, which blends into the white background. Accordingly, the digital system does not recognize the number and does not record it in the database of traffic violations. There is no one to give a fine!

Does nanofilm work during the day?

  • The infrared beams of speed cameras work both day and night.

Why should I buy your product?

  • Our Ecoslick® nanofilm is manufactured in Germany and is therefore reliable and effective. All numbers and symbols comply with the national standards of each country. On the market you can find offers with a suspiciously low price - accordingly, such a film will not protect you from the eyes of a traffic cop or simply will not fit the size of your license plate.

Step-by-step instructions

Materials Needed:
Alcohol wipes (included in kit)
Nanofilm material sheet
Precision knife or cutter

Step 1: Clean the License Plate
Use the alcohol wipes provided to thoroughly clean the license plate surface.
Remove all dust, dirt, and grease.
Allow the plate to dry completely.

Step 2: Apply the Nanofilm Material
Carefully peel the nanofilm material off its paper backing.
Place the adhesive side of the material onto the license plate, covering the letters and numbers.
Avoid pressing too hard on the plate background to make removing excess material easier later.

Step 3: Cut the Letter and Number Outlines
Use a precision knife or cutter to trace the edges of the letters and numbers on the license plate.
Follow the corners closely for clean, accurate cuts.
Be careful not to scratch the license plate surface.

Step 4: Remove Excess Nanofilm Material
Gently peel away the excess nanofilm material surrounding the letters and numbers.
Ensure the nanofilm sticks firmly to the characters while leaving the background clean.

Important Tips:
Perform the application in a dry, dust-free environment.
Take your time to ensure precise cutting for a professional finish.
Avoid washing the vehicle for 24 hours to allow proper adhesion.

Nanofilm Ecoslick Moto US

For motorcycle riders across the United States, maintaining privacy on the road is increasingly essential. Alite’s Nanofilm Ecoslick, specially designed for U.S. motorcycle license plates, offers a discreet and efficient way to prevent unwanted radar detection while preserving the clean, sharp look of your bike.

Why Alite Nanofilm Ecoslick stands out for U.S. motorcycles

  1. Precision Fit for U.S. Plate Characters: Crafted to perfectly align with the unique letters and numbers of American motorcycle plates, Alite Nanofilm Ecoslick ensures a precise fit that maintains the natural aesthetics of your license plate while offering effective privacy.
  2. Cutting-Edge Anti-Radar Technology: The advanced Nanofilm Ecoslick creates a shield against radar systems, helping reduce the likelihood of speed cameras capturing your license plate. This innovative solution is crafted to allow you to ride with confidence, knowing you’re protected.
  3. Weather-Resistant Durability: U.S. climates vary greatly, from humid coasts to arid deserts. Nanofilm Ecoslick is built to withstand harsh sunlight, rain, and snow, keeping your motorcycle plate safeguarded in any environment.
  4. Simple, Hassle-Free Application: Designed for easy installation, Nanofilm Ecoslick can be effortlessly applied to your plate characters, giving you a quick upgrade in privacy without the need for complex tools or professional installation.
  5. Invisible Coverage with Aesthetic Integrity: Unlike bulky covers, Nanofilm Ecoslick provides a near-invisible layer that preserves the original look of your motorcycle plate. Enjoy privacy without compromising on style or visibility.

The need for license plate privacy on U.S. roads

In a landscape of growing surveillance, motorcyclists require a reliable solution to shield their plates without drawing attention. Nanofilm Ecoslick’s almost undetectable finish creates a protective barrier, making it the ideal choice for riders who want discretion alongside advanced radar protection.

Challenges U.S. motorcycle riders face today

  • Increased Surveillance: With more cameras and radar detectors on U.S. roads, protecting your personal data has become a necessity. Alite’s Nanofilm Ecoslick empowers riders to maintain their privacy while traveling, whether it’s in urban areas or on open highways.
  • Legal Compliance and Discretion: Alite’s solution is designed to provide visibility in compliance with regulations while simultaneously protecting against unwanted radar detection, offering a seamless balance between privacy and legality.
  • Enhanced Focus and Security: By safeguarding your motorcycle’s license plate, you can focus entirely on the ride without the constant worry of being monitored, enabling a freer, more enjoyable riding experience.

Alite Nanofilm Ecoslick - The ideal choice for U.S. motorcycle license plate protection

Choosing Nanofilm Ecoslick means opting for a product that’s both powerful and unobtrusive. It offers character-by-character coverage, designed to minimize detection without altering the appearance of your license plate. From scenic routes to urban landscapes, Alite’s solution protects you with style and efficiency, making every ride secure and private.

Elevate your ride with Nanofilm Ecoslick today!

Take control of your privacy on the road with Alite Nanofilm Ecoslick, specifically crafted for U.S. motorcycle plates. Discover how this advanced solution can shield your plate from unwanted radar and let you embrace every journey with confidence. Equip your motorcycle with the ultimate privacy upgrade and experience the Alite difference today!

Show more ↓
Choose products

Gesamt: 0 artikel

$0.00 $0.00

Auschecken Auschecken
Top Icon

🤍 Happy Women’s Day 🤍

We prepared a gift for you

Get up to

-50% OFF