Back to previous page

Catalog

Nanofilm Ecoslick

Nanofilm Ecoslick US

Material Nanofilm Ecoslick™

Ultimate solution against radars

Show more ↓

Suitable for

Car

Material Size

100 mm

Color

Black

Version

Nanofilm Ecoslick US,

Flat – flat numbers and letters, characters are printed and do not have any volume

Embossed – embossed numbers and letters, characters are extruded from the surface of the license plate

Suitable for

Car

Material Size

100 mm

Color

Black

Version

Nanofilm Ecoslick US,

Flat – flat numbers and letters, characters are printed and do not have any volume

Embossed – embossed numbers and letters, characters are extruded from the surface of the license plate

Testimonials

What does a nano-film include?

  • When ordering one nano-film, you receive a piece of material from which you can cut out the letters you need on your own.

What happens if the nanofilm is scratched?

  • It is quite difficult to damage the Ecoslick® because it is attached very firmly, forming an almost inseparable bond with the license plate. Even if there are scratches, it will be very difficult for the speed camera to determine which symbol is covered.

What happens to the nanofilm after washing?

  • Ecoslick nanofilm is not afraid of washing, any type of car wash. The film is almost impossible to tear off with water pressure. Therefore, be extremely careful and precise when gluing.

Is it necessary to put a film on the rear license plate of a car?

  • Depending on the terrain, speed cameras may be located in two directions and will record your car from both sides. We recommend gluing the film on both sides.

How is Ecoslick® nanofilm installed?

  • Cut the piece of the material and stick it on the corresponding symbol on the license plate. Then cut around the outline of the symbol. Cut slowly and do not press the blade too hard to avoid damaging the license plate. Gently remove the exess of material and it's done!

How many symbols are best covered with film?

  • The more symbols are hidden under the nanofilm, the less opportunities there are to decipher the number from the camera recording. It is recommended to cover all front and back license plates symbols.

How long will nanofilm last?

  • Ecoslick® film is designed for many years of use, since it is created from durable, wear-resistant materials designed to withstand difficult weather conditions, temperature changes and varying degrees of mechanical impact. The warranty period is 5 years.

What is the difference between an infrared flash and a camera flash?

  • Infrared light is highly focused rays that are invisible to the human eye and are different from the bright flash of a camera. It is in the infrared spectrum that automatic speed cameras operate. It is against this spectrum that Ecoslick® film acts.

What does the camera see when using nanofilm?

  • The camera only sees the illuminated area where the symbols are hidden under the Ecoslick® stickers, which blends into the white background. Accordingly, the digital system does not recognize the number and does not record it in the database of traffic violations. There is no one to give a fine!

Does nanofilm work during the day?

  • The infrared beams of speed cameras work both day and night.

Why should I buy your product?

  • Our Ecoslick® nanofilm is manufactured in Germany and is therefore reliable and effective. All numbers and symbols comply with the national standards of each country. On the market you can find offers with a suspiciously low price - accordingly, such a film will not protect you from the eyes of a traffic cop or simply will not fit the size of your license plate.

Step-by-step instructions

Materials Needed:
Alcohol wipes (included in kit)
Nanofilm material sheet
Precision knife or cutter

Step 1: Clean the License Plate
Use the alcohol wipes provided to thoroughly clean the license plate surface.
Remove all dust, dirt, and grease.
Allow the plate to dry completely.

Step 2: Apply the Nanofilm Material
Carefully peel the nanofilm material off its paper backing.
Place the adhesive side of the material onto the license plate, covering the letters and numbers.
Avoid pressing too hard on the plate background to make removing excess material easier later.

Step 3: Cut the Letter and Number Outlines
Use a precision knife or cutter to trace the edges of the letters and numbers on the license plate.
Follow the corners closely for clean, accurate cuts.
Be careful not to scratch the license plate surface.

Step 4: Remove Excess Nanofilm Material
Gently peel away the excess nanofilm material surrounding the letters and numbers.
Ensure the nanofilm sticks firmly to the characters while leaving the background clean.

Important Tips:
Perform the application in a dry, dust-free environment.
Take your time to ensure precise cutting for a professional finish.
Avoid washing the vehicle for 24 hours to allow proper adhesion.

Nanofilm Ecoslick US

In the fast-paced world of automotive innovation, Nanofilm Ecoslick has emerged as a game-changing solution developed by Alite. This revolutionary product is crafted to address the growing concerns of vehicle owners in the United States regarding the visibility of their license plates and the looming threat of hefty fines from speed cameras. Traditional license plates often attract unwanted scrutiny, but Nanofilm Ecoslick offers a discreet yet effective way to shield your identity on the road.

With a commitment to excellence, Alite has employed advanced technology and premium materials to create a high-quality number plate film that not only enhances the look of your vehicle but also provides robust protection against traffic enforcement. As the automotive industry evolves, Nanofilm Ecoslick stands out as the ideal choice for drivers who wish to safeguard themselves from the anxiety of speeding fines and the associated stress of driving.

Benefits of Nanofilm Ecoslick for U.S. Drivers

The introduction of Nanofilm Ecoslick has transformed the experience for countless vehicle owners, particularly those who frequently grapple with the repercussions of speed enforcement. Below are the key advantages that address the common pain points of drivers:

  1. Superior Concealment: The invisible license plate technology of Nanofilm Ecoslick makes it extremely difficult for speed cameras to capture clear images, thereby drastically reducing the risk of receiving fines.
  2. Long-Lasting Durability: This advanced film is engineered to withstand a variety of weather conditions, ensuring that your license plate remains well-protected and looks new for an extended period.
  3. Simple Installation Process: Unlike other protective solutions that can be complicated, Nanofilm Ecoslick is designed for straightforward application, allowing anyone to install it with ease.
  4. Cost-Effective Solution: By helping you avoid costly penalties, investing in anti radar stickers like Nanofilm Ecoslick can lead to significant savings over time.
  5. Stylish Aesthetic: The film enhances the appearance of your car plates, giving your vehicle a polished and sleek look while maintaining functionality.
  6. All-Weather Protection: The nanofilm ensures optimal visibility of your plate, keeping you under the radar at all times, whether in daylight or at night.

Comprehensive installation guide for Nanofilm Ecoslick

Installing Nanofilm Ecoslick on your license plate is an easy process that requires precise measurements and careful cutting. Follow this detailed guide for optimal results:

  1. Gather Necessary Tools: You’ll need scissors, a ruler, a squeegee, and, of course, your Nanofilm Ecoslick.
  2. Measure Your License Plate: Start by measuring the dimensions of your license plate carefully, ensuring you accurately record the length and width for a perfect fit.
  3. Cut the Nanofilm: Based on your measurements, cut the number plate film to the appropriate size, leaving a slight excess around the edges to ensure better adhesion.
  4. Thoroughly Clean the Surface: Make sure your car with plate is free of dirt, grease, and debris to guarantee optimal film adhesion.
  5. Apply the Film: Peel off the backing of the Nanofilm Ecoslick license plate and carefully position it on your plate. Start from one edge and smooth it down to eliminate air bubbles. Use the squeegee to press the film securely into place.
  6. Trim Excess Film: If any excess film remains around the edges, trim it off carefully to achieve a seamless fit.
  7. Allow It to Cure: Let the film cure for several hours before exposing it to harsh environmental conditions.

Where to purchase Nanofilm Ecoslick for license plates USA?

Are you ready to upgrade your vehicle's protection with Nanofilm Ecoslick? You can conveniently order this innovative product directly from the Alite website. Here, you’ll find a range of options tailored to your specific needs, ensuring you select the perfect fit for your license and plates. With its unique capabilities and benefits, Nanofilm Ecoslick is not just a purchase; it’s an investment in both style and protection for your vehicle.

Don’t allow traffic fines to disrupt your driving experience. Embrace the cutting-edge technology of Nanofilm Ecoslick and drive with confidence, knowing you’re shielded from unwanted attention! This advanced protective solution allows you to enjoy the freedom of driving without the constant worry of penalties, making every journey more enjoyable and stress-free.

Show more ↓
Choose products

Total: 0 items

$0.00 $0.00

Checkout Checkout
Top Icon

🤍 Happy Women’s Day 🤍

We prepared a gift for you

Get up to

-50% OFF