Material Nanofilm Ecoslick™
Ultimate solution against radars
Geschikt voor
Car
Materiaalgrootte
100 mm
Kleur
Zwart
Versie
Nanofilm Ecoslick European & UK,
Geschikt voor
Car
Materiaalgrootte
100 mm
Kleur
Zwart
Versie
Nanofilm Ecoslick European & UK,
Testimonials
Recorded by
Sophia Smith, United States
Recorded by
Olivia Williams, United States
Recorded by
William Garcia, United States
What does a nano-film include?
- When ordering one nano-film, you receive a piece of material from which you can cut out the letters you need on your own.
What happens if the nanofilm is scratched?
- It is quite difficult to damage the Ecoslick® because it is attached very firmly, forming an almost inseparable bond with the license plate. Even if there are scratches, it will be very difficult for the speed camera to determine which symbol is covered.
What happens to the nanofilm after washing?
- Ecoslick nanofilm is not afraid of washing, any type of car wash. The film is almost impossible to tear off with water pressure. Therefore, be extremely careful and precise when gluing.
Is it necessary to put a film on the rear license plate of a car?
- Depending on the terrain, speed cameras may be located in two directions and will record your car from both sides. We recommend gluing the film on both sides.
How is Ecoslick® nanofilm installed?
- Cut the piece of the material and stick it on the corresponding symbol on the license plate. Then cut around the outline of the symbol. Cut slowly and do not press the blade too hard to avoid damaging the license plate. Gently remove the exess of material and it's done!
How many symbols are best covered with film?
- The more symbols are hidden under the nanofilm, the less opportunities there are to decipher the number from the camera recording. It is recommended to cover all front and back license plates symbols.
How long will nanofilm last?
- Ecoslick® film is designed for many years of use, since it is created from durable, wear-resistant materials designed to withstand difficult weather conditions, temperature changes and varying degrees of mechanical impact. The warranty period is 5 years.
What is the difference between an infrared flash and a camera flash?
- Infrared light is highly focused rays that are invisible to the human eye and are different from the bright flash of a camera. It is in the infrared spectrum that automatic speed cameras operate. It is against this spectrum that Ecoslick® film acts.
What does the camera see when using nanofilm?
- The camera only sees the illuminated area where the symbols are hidden under the Ecoslick® stickers, which blends into the white background. Accordingly, the digital system does not recognize the number and does not record it in the database of traffic violations. There is no one to give a fine!
Does nanofilm work during the day?
- The infrared beams of speed cameras work both day and night.
Why should I buy your product?
- Our Ecoslick® nanofilm is manufactured in Germany and is therefore reliable and effective. All numbers and symbols comply with the national standards of each country. On the market you can find offers with a suspiciously low price - accordingly, such a film will not protect you from the eyes of a traffic cop or simply will not fit the size of your license plate.
Step-by-step instructions
Materials Needed:
Alcohol wipes (included in kit)
Nanofilm material sheet
Precision knife or cutter
Step 1: Clean the License Plate
Use the alcohol wipes provided to thoroughly clean the license plate surface.
Remove all dust, dirt, and grease.
Allow the plate to dry completely.
Step 2: Apply the Nanofilm Material
Carefully peel the nanofilm material off its paper backing.
Place the adhesive side of the material onto the license plate, covering the letters and numbers.
Avoid pressing too hard on the plate background to make removing excess material easier later.
Step 3: Cut the Letter and Number Outlines
Use a precision knife or cutter to trace the edges of the letters and numbers on the license plate.
Follow the corners closely for clean, accurate cuts.
Be careful not to scratch the license plate surface.
Step 4: Remove Excess Nanofilm Material
Gently peel away the excess nanofilm material surrounding the letters and numbers.
Ensure the nanofilm sticks firmly to the characters while leaving the background clean.
Important Tips:
Perform the application in a dry, dust-free environment.
Take your time to ensure precise cutting for a professional finish.
Avoid washing the vehicle for 24 hours to allow proper adhesion.
🤍 Happy Women’s Day 🤍
We prepared a gift for you
Get up to
