Nanofilm Ecoslick™ - For 1 license plates (US version)

When ordering one nano-film, you receive a piece of material from which you can cut out the letters you need on your own.

It is quite difficult to damage the Ecoslick® because it is attached very firmly, forming an almost inseparable bond with the license plate. Even if there are scratches, it will be very difficult for the speed camera to determine which symbol is covered.

Ecoslick nanofilm is not afraid of washing, any type of car wash. The film is almost impossible to tear off with water pressure. Therefore, be extremely careful and precise when gluing.

Depending on the terrain, speed cameras may be located in two directions and will record your car from both sides. We recommend gluing the film on both sides.

Cut the piece of the material and stick it on the corresponding symbol on the license plate. Then cut around the outline of the symbol. Cut slowly and do not press the blade too hard to avoid damaging the license plate. Gently remove the exess of material and it's done!

The more symbols are hidden under the nanofilm, the less opportunities there are to decipher the number from the camera recording. It is recommended to cover all front and back license plates symbols.

Ecoslick® film is designed for many years of use, since it is created from durable, wear-resistant materials designed to withstand difficult weather conditions, temperature changes and varying degrees of mechanical impact. The warranty period is 5 years.

Infrared light is highly focused rays that are invisible to the human eye and are different from the bright flash of a camera. It is in the infrared spectrum that automatic speed cameras operate. It is against this spectrum that Ecoslick® film acts.

The camera only sees the illuminated area where the symbols are hidden under the Ecoslick® stickers, which blends into the white background. Accordingly, the digital system does not recognize the number and does not record it in the database of traffic violations. There is no one to give a fine!

The infrared beams of speed cameras work both day and night.

Our Ecoslick® nanofilm is manufactured in Germany and is therefore reliable and effective.
All numbers and symbols comply with the national standards of each country.
On the market you can find offers with a suspiciously low price - accordingly, such a film will not protect you from the eyes of a traffic cop or simply will not fit the size of your license plate.

Easily attach the frame using included screws or adhesive — you can read the full instructions set up page.